ZJF Series Spring Powder Feeder
Product Description
ZJF series spring powder feeder has the advantages of high efficiency, accurate feeding control and good sealing. The feeding cycle is controlled by the material level device to realize feeding automation, save time, reduce labor cost and meet the automatic feeding function of all kinds of PVC products industry.ZJF Series Spring Powder Feeder
Product Detail
1.ZJF Series Spring Powder Feeder Introduction
The ZJF series spring powder feeder adopts the principle of spiral conveying, and uses the rotation of the steel wire spring to transport the plastic raw materials from the storage box to the hopper of the plastic forming host until it is full; when the material level switch sends out a full material signal, the feeding is stopped. After the material level drops to a certain position, the material level switch sends out a signal to continue feeding; this repeats the cycle to realize feeding automation.
The machine is mainly applicable to the feeding of various plastic powders and particles. It is used together with the plastic molding host (such as extruder and injection molding machine). It has the advantages of simplified operation, stable performance, saving manpower, improving labor conditions, large conveying capacity and long service life.
2.The ZJF Series Spring Powder Feeder Parameter (Specification)
Parameters are subject to change without prior notice
3.The ZJF Series Spring Powder Feeder Feature And Application
· The screw conveying principle and the rotation of steel wire spring are adopted to convey raw materials
· Automatic dosing control
· It is suitable for feeding all kinds of plastic powder and particles.
The ZJF series spring powder feeder adopts the principle of spiral conveying, and uses the rotation of the steel wire spring to transport the plastic raw materials from the storage box to the hopper of the plastic forming host until it is full; when the material level switch sends out a full material signal, the feeding is stopped. After the material level drops to a certain position, the material level switch sends out a signal to continue feeding; this repeats the cycle to realize feeding automation.
The machine is mainly applicable to the feeding of various plastic powders and particles. It is used together with the plastic molding host (such as extruder and injection molding machine). It has the advantages of simplified operation, stable performance, saving manpower, improving labor conditions, large conveying capacity and long service life.
2.The ZJF Series Spring Powder Feeder Parameter (Specification)
|
Model |
ZJF-300 |
ZJF-500 |
ZJF-700 |
|
Feeding motor power(kW) |
1.1 |
1.5 |
2.2 |
|
Hopper capacity (L) |
120 |
130 |
150 |
|
Cylinder capacity (L) |
150 |
180 |
200 |
|
Feeding height (m) |
3-5 |
3-5 |
3-5 |
|
Spring diameter (mm) |
Φ30 |
Φ70 |
Φ70 |
|
Conveying capacity (kg/h) |
300 |
500 |
700 |
Parameters are subject to change without prior notice
3.The ZJF Series Spring Powder Feeder Feature And Application
· The screw conveying principle and the rotation of steel wire spring are adopted to convey raw materials
· Automatic dosing control
· It is suitable for feeding all kinds of plastic powder and particles.
· It has the advantages of simple operation and large conveying capacity